Warranty: | 1 Year | Maximum Working Pressure: | 2.0Mpa |
---|---|---|---|
Condition: | New | Application: | Heating Or Cooling,Heat Transfer,HVAC,Refrigeration Parts,Heater Parts |
Plate Material: | 316L,Titanium,SS304,254SMO | Gasket Material: | EPDM,HNBR,FKM,NBR EPDM FKM,FKW |
High Light: | 254SMO Plate PHE Heat Exchanger,HVAC PHE Heat Exchanger,FKM Gasket PHE Heat Exchanger |
SMALL HEAT EXCHANGER gasket plate heat exchanger replace AF M15BF factory price
The plate heat exchanger consists of a pack of corrugated metal plates with portholes for the passage of the two fluids between which heat transfer will take place. The plate pack is assembled between a fix frame plate and a movable pressure plate and compressed by tightening bolts. The plates are fitted with a gasket which seals the inter plate channel and directs the fluids into alternate channels. The number of plates is determined by the flow rate, physical properties of the fluids, pressure drop and temperature program. The plate corrugations promote fluid turbulence and support the plates against differential pressure. The frame plate and the pressure plate are suspended from an upper carrying bar and located by a lower guiding bar, both of which are fixed to a support column. Connections are located in the frame plate or, if either or both fluids make more than a single pass within the unit, in the frame and pressure plates.
What are the advantages of Plate Heat Exchanger?
Introduction to sheet material and application:
material | application |
SUS304 / SUS316L | Purified water, river water, food oil, mineral oil |
Titanium / Pal ladium | Sea water, salt water, salinized substance |
Hadtelloy Alloy / C-276 | Concentrated sulfuric acid, hydrochloric acid, phosphoric acid |
Ni / Nickel | High temperature and high concentration caustic soda |
Material and operating conditions of gasket:
Material | Application | working temperature |
NBR | Water, sea water, mineral oil, salt water | -15—130℃ |
HNBR | High temperature mineral oil, high temperature water | 15—140℃ |
EPDM/HEPDM | Water,Hot water, steam, acid, alkali,caustic | -25—150℃ |
Viton/Fluorine Rubber | Strong acid, strong alkali, mineral oil, grease and fuel oil, etc | 5—200℃ |
NEOPRENE | Acid, alkali, mineral oil, low molecular weight aliphatic hydrocarbon | 35—130℃ |
Silicon Rubber | High temperature and some corrosive environments | 65—200℃ |
Introduction of plate heat exchanger manufacturer: